Touch Screen For Samsung Galaxy J7 2017 J730 SM-J730F Lcd


Full screen (LCD + Digitizer) for Samsung Galaxy J7 2017 J730F SM-J730F, necessary screen if you can not see the image of your terminal due to a blow or an unexpected fall.

TFT screen, different thickness than the original, although this will not prevent it from being installed correctly by a qualified professional.

Remember that you are buying a compatible screen, it has brightness control.


 Customer ratings and reviews
Nobody has posted a review yet
in this language

Full Screen For Samsung Galaxy J7 2017 J730F SM-J730F Lcd Touch

This full screen, has the touch screen or digitizing glass, the external screen, which is the one that works to the touch and also the LCD screen, the internal one, which is the one that provides the image to the device and allows us to visualize what appears.

You can request this screen to change the defective and repair your Samsung Galaxy J7 2017 J730 J730F J730FN phone thus eliminating any display problems, screen breakage and scratches, dead pixels, color problems, etc., that have appeared on it.

All our screens are checked, before shipping

The screens are sent in a box, in a bubble envelope, making sure that they arrive correctly at their destination.


New screen, compatible with Samsung J7 (2017) with adjustable brightness.

The screen that we offer apart from sending it with the tools necessary for its change, has the built-in adhesive for a better and easy fixation.

Inform you before you make your purchase, this screen is a compatible screen, therefore it is of lower quality than the original, but of an equally optimal operation.

TFT screen, of a different thickness than the original, although this will not prevent it from being installed correctly by a qualified professional.

We have this same screen in different colors, you can choose between black, gold or silver.



Before installing the screen, turn off the phone, if you cannot turn it off, remove the battery instead. Failure to do so will damage the motherboard IC, which will cause the touch screen to not work.

When you receive the screen remember not to install it immediately, before you have to carefully check the status and appearance of the screen. Make sure it has arrived perfect and your appearance in the shipment has not been damaged. If you detect any incident, contact us, it is necessary that you send us photos of what happens to the screen to check on the status that is, so we expedite the solution to this problem.

Check and test the screen before removing any protector or sticker you have, these are the proof of guarantee of each screen, once the warranty is removed it will not be valid.

We strongly suggest testing the screen before moving on to its installation. Please perform the necessary tests, hold the screen received, take the flex and connect it to your phone, turn on your phone, try the touch and the image. If the test is correct, go to your facility. If for any reason we do not have any images, please contact us. You should not press hard on the screen as it is very fragile and can be broken especially at the top where the headset is worn. We are not responsible if the mobile phone is damaged during installation.

You will notice that there are many screws in the process of removing the screen and replacing it. These screws are of different sizes and lengths from each other, so we advise you to mark them. If you put a screw out of its place, in a wrong place, you can have the purpose of breaking it, be careful.

You must take special care in handling the flex cable, which does not bend more than necessary, do not leave any marks, or press it in excess.


It is advisable to use an ESD bracelet (Electrostatic discharge bracelet) or discharge electricity from your body before touching any component of the smartphone. This will prevent this electricity from damaging the electronic components inside your mobile phone. In addition to this bracelet do not forget to protect your eyes and take special care not to cut your finger with the splinters that the glass detaches when removing the broken screen.

Changing the Samsung screen is a slow and easy but delicate job, since it is a very fragile replacement. Make sure the flex cable does not bend too much. Folding this component more than 90º will cause and cause the black display of the screen.

To leave the screen fixed, make sure the frame is very clean, you can heat it with a dryer and let it dry for 24 hours.

Package includes:

1 x J7 Pro SM-j730F full screen (2017)

1 x Image tools.


Data sheet

Compatible brand
For Samsung
Compatible model
For Samsung Galaxy J7 2017
Display: digitizer
Package includes:
1 x Pantalla Lcd para Galaxy J7 2017 SM-J730F J730F J730FN
1 X
Herramientas de la imagen
Easy, visit our blog
With tools
Once the protectors have been removed or the warranty has been voided, you must test it before installation.
With adhesive to fix the screen:
Con sobre de burbujas en caja de cartón.

Specific References


Be the first to write your review !