Touch Screen for iPhone 8 Complete LCD Glass White Black
Full screen for iPhone 8, this screen has the Touch screen, which provides the sensitivity of the phone to the touch, and the LCD screen, this is the one that provides the image to the device, so this screen for iPhone 8 is the one you need as a replacement, in both cases.
IPhone 8 Display Complete Touch + LCD Retina Display Touch Glass White Black
This is a full screen, makes the touch function and in turn provides the image to the device.
You can buy this screen to replace the defective one and thus repair your iPhone 8 phone. By changing this screen you will be able to eradicate display problems, screen breakage and scratches, dead pixels, color problems, etc.
We test all screens before shipping.
New screen, retina HD, compatible with the model number eight of iPhone.
The screen is factory assembled.
Keep in mind before making the purchase that this screen is a compatible screen therefore it is of lower quality than the original, but of optimal operation.
4.7-inch Multi-Touch LCD widescreen LED-backlit with IPS technology.
The resolution is 1,334 by 750 pixels at 326 p / p.
The contrast is 1,400: 1.
We have this screen in different colors, you can buy it in black, gold or silver.
Before installing the screen, turn off the phone, if you cannot turn it off, remove the battery instead. Failure to do so will damage the motherboard IC, which will cause the touch screen to not work.
Do not install the screen for your iPhone upon receipt, before carefully checking the condition and appearance of the screen, check it, confirm that it has arrived perfect and has not deteriorated its appearance in shipping. If you detect any problem, please contact us and send us some photos to check on the state you are in and to solve the problem as soon as possible.
Test the screen before removing any protector or sticker you have, these are the proof of warranty of the screen you just bought, once the warranty is removed, it will cease to be valid. We strongly suggest testing the screen before installation. Please simulate the tests, hold the received screen, take the flex and connect it to your phone, turn it on, try the touch and the image. If the test is correct, you can install it. If for some reason the phone does not show the image, please contact us. Take special care with the screen in the installation process, we are not responsible if the mobile phone is damaged in such change.
You will notice when you open the phone that there are many screws in the process of removing the screen and replacing it. These screws are of different sizes and lengths from each other, so we advise you to mark them. If a screw were placed in another place, in a wrong place, it can have the purpose of breaking it, be careful.
DURING THE INSTALLATION:
It is advisable to use an ESD bracelet (Electrostatic discharge bracelet) or discharge electricity from your body before touching any component of the smartphone. This will prevent this electricity from damaging the electronic components inside your mobile phone. In addition to this bracelet do not forget to protect your eyes and take special care not to cut your finger with the splinters that the glass detaches when removing the broken screen.
Changing the iPhone screen is not a difficult job, but you have to take special care when handling the flex, especially the LCD. With one thumb, hold the LCD flex and with the other hand fold at a 90º angle. If the flex suffered any damage, vertical stripes may be displayed on the acquired screen
After lifting the iPhone 8 screen assembly, do not lift the screen more than 90º from the rear camera to avoid damaging the flexible cables.
Unplug the front camera connector, the flexible start button connector, the flex connector of the LCD screen and the flexible connector of the digitizer.
Flexible cables should bend gently a little before installation, but do not use too much force, there should be no bending marks on the flex cables. Do not force any IC from the back of the screen, in general it should not force anything, everything should go by its natural fall
Plug the flexible connector of the front camera, the flexible connector of the start button, the flexible connector of the LCD screen and the flexible connector of the digitizer.
When plugging in the connectors, keep the screen about 90º from the back cover.
With the update to iOS 11.3 the iPhone will not be able to adjust the brightness automatically, this will happen with any and all of the screen, even if
- Compatible brand
- For Apple
- Compatible model
- For iPhone 8
- Display: digitizer
- Before Installing Test its operation
- With tools
- Con sobre de burbujas en caja de cartón.
- Once the protectors have been removed or the warranty has been voided, you must test it before installation.
- Package includes:
- Pantalla Completa táctil + LCD para iPhone 8
- 1 X
- Image tools.